slate roof dc

Build your own solar panel at home

energy crisis is on, fuel prices have hit the roof and are scheduled for break the roof soon. The days are not far when the utilities are making the electricity tariff to a point where you have to run for cover. All world are seeking ways to install any alternative energy system at home. solar power system is one of the popular alternatives. A solar energy system consists of three basic components, in addition to the mandatory disconnects and safety accessories:
1. The solar panel;
2. The battery, to store energy generated, and needs the charger;
3. Inverter to convert DC power stored in the network.
The cost of a solar power system capable of delivering power to all appliances in the home can be very important and the solar panel makes a significant proportion of it. Fortunately, the solar energy system can done in a modular way to install the basic requirement and little by little as time and cost of the permit, carry out adding to it. Its solar panel can be mounted for you; the other components mentioned above will be procured as needed from local suppliers.

What need
The actual process of assembling your own solar panel is not very difficult. It takes a certain amount of guidance on some aspects such as:
How assess the solar energy panel rating to meet your needs Where to buy solar cells
How to interconnect the cells for the desired voltage and current capacity
How to install solar panel
How to install solar panel, etc.
There are many guides available to provide such information. The guides cost about $ 25 to $ 40. A small search on the internet will give website addresses where these guides are available. These guides give instructions step by step assembly and installation with pictures or photographs as necessary. Get one of these guides, in-depth study and Now you're ready to get going! To build your own solar panel you need the following materials:
Solar cells
A sheet of wood of suitable size
Glass slides
copper cables
Few simple tools such as pliers, screwdrivers, drill machine by hand, a soldering iron (with solder flow, etc.) will suffice.
Fitting solar panels:
• Organize the solar cells in rows on the sheet of plywood, with the back of the cells timber and the configuration suggested in the guidebook.
• Drill holes in the plywood sheet so that the cables connecting the cells can be taken through the back. Interconnection of the cells as indicated.
• Place a backing board in the back of the wood so that the interconnecting cables are in place and sealed
• Place the glass sheet on top of solar cells
• Place a Part of making this assembly (as you would in making a photograph)
• Seal the edges of the assembly, and the solar panel is ready.
The assembly procedure described above is the basic process of assembling your own solar panel. Of course you can improvise on it to do more assembly robust, that is impervious to penetration by dust, water, etc, make it safe for outdoor installation will not cause any problems. A car panel mounted solar can result in substantial savings. You can save 50% or more of the cost of solar panel to do their own assembly.
Learn How make solar panels and save up to 80% of electricity bills. Details Now!

About the Author

Jenney is a website of homesolarwindpower.com,where you can learn How to Make Solar Panels and Build Wind Generator,then Save Up to 80% Electricity Bills every month.

WWW JLONGANDSON DC X1

Tags: slate roof dc, slate roof dc repair

This entry was posted on November 6, 2006 at 2:23 am. You can follow any responses to this entry through the RSS 2.0 feed.You can leave a response, or trackback from your own site.

Posted in Slate Roofing System by admin No Comments Yet